We're a headhunter agency that connects US businesses with elite LATAM professionals who integrate seamlessly as remote team members — aligned to US time zones, cutting overhead by 70%.

We’ll match you with Latin American superstars who work your hours. Quality talent, no time zone troubles. Starting at $9/hour.
Contact UsRobotics sensor data collection is the work of recording, in sync, everything a robot would need to know about a physical task: what the gripper did, how the hand moved, how hard it pushed, what it touched and how far away each object was. Video shows what happened. Sensors record the parts a camera cannot see, and a policy trained on both learns to act rather than to watch. This guide covers the sensor streams robotics teams collect, the two technical failures that quietly ruin a dataset, how a recording protocol and quality control work, the difference between controlled and field collection, and who does the recording when a program needs hundreds of people.
A training episode for a manipulation policy combines several streams recorded at the same time, and each one answers a question the others cannot.
Research collections such as Open X-Embodiment pooled robot trajectories that pair camera images with the robot's own joint and gripper readings. The guide to physical AI data places these streams in the wider picture.
Sensors matter most where video falls short. In contact-rich tasks such as inserting a plug or closing a drawer that sticks, the camera sees nearly the same frames whether the task succeeded or failed; force and tactile data tell them apart. When hands disappear into a sink or a toolbox, gripper state and IMU keep recording. When a cup has to land on a shelf, a single camera estimates distance poorly and depth supplies the missing dimension. The comparison of teleoperation, egocentric video and simulation explains how each method captures these streams.
Sensor data is only useful when every stream is aligned in time and expressed in the same physical frame, and both conditions fail silently.
Time alignment. Each device keeps its own clock, and clocks drift over an hour of recording. A gripper closing a quarter of a second after the matching video frame teaches the model the wrong timing for every grasp. Programs use a shared timestamp source where possible, a sync event at the start of each episode that every stream records (a clap, a flash, a tap on the sensor), and an end-of-episode check that drift stayed within tolerance.
Frame drops. Phones throttle when they overheat, wireless sensors lose packets, storage fills up. A missing second of depth inside a good episode is hard to notice and easy to train on. Protocols log expected and received sample counts per stream, and reviewers reject episodes with gaps.
Calibration. Depth cameras need intrinsic calibration (how the lens maps the world to pixels) and extrinsic calibration (where the camera sits relative to the gripper or the IMU). Force sensors need zeroing before contact and a known orientation so gravity can be subtracted. Calibration done per device and repeated whenever a mount moves is cheap; finding a skewed camera after ten thousand episodes is expensive.
Units and conventions. Meters or millimeters, newtons or grams-force, which axis points forward: a dataset collected across many devices needs one documented convention and a conversion step on ingest.
A recording protocol turns a task into something hundreds of people can capture the same way, and the quality check applies the same list from the other side.
The protocol defines the task and the episode boundaries (from reaching for the cup to releasing it), the allowed variations, the device and mount for each stream, the sync procedure, the metadata stored with each episode (contributor code, device IDs, calibration version, task ID, setting, timestamps, outcome) and the acceptance criteria, written in the contributor's language and shared on day one.
Quality control then checks each episode, stream by stream and all together, usually in the client's dashboard:
Rejections grouped by contributor and by reason show whether a mount keeps slipping, an instruction is unclear or one person needs coaching. Teams that pilot with a few dozen contributors, read every rejection and revise the protocol before scaling save most of the rework.
Sensor data comes from two kinds of settings, and the choice decides how much instrumentation each episode carries and how many places the dataset covers.
Controlled collection gives the cleanest streams. A robot that will work in homes also needs the variety only field collection provides: different counters, lighting, tools and hands. Handheld rigs such as the Universal Manipulation Interface, a gripper with a wrist camera developed by university researchers, show the middle path: a person demonstrates with an instrumented tool wherever they are. Most programs fine-tune on controlled data from the target robot and pretrain on field data from the real world.
Field collection moves the hard problem from hardware to people. Each kit has to reach a contributor, get mounted correctly, pass a device check and come back with episodes that pass review.
Once the kit, the protocol and the dashboard exist, the pace of a field collection program is set by how many reliable contributors you can recruit, equip, coordinate and keep.
Vintti AI supplies that workforce layer. The model, proven on egocentric video programs, applies the same way when the kit adds a depth phone, a wearable IMU or a handheld gripper:
On one egocentric video program for a US physical AI data company, Vintti AI recruited and coordinated about 400 contributors who delivered more than 4,700 approved hours, with a rejection rate close to 3%. The capture app, the sensor kit and the quality dashboard stay with the client; Vintti AI brings and sustains the people. Latin America is the core pool, and Vintti AI also recruits in the US and other regions when a project calls for it. The guide on how to choose an AI data collection company sets a workforce partner next to a dataset vendor.
(Note: Vintti AI is a staffing and recruiting firm. We are not an Employer of Record (EOR), a BPO, a dev shop or a managed service. In data collection programs, Vintti AI does not sell datasets and does not operate a capture or labeling platform: we recruit, onboard and coordinate the contributors who record in your capture app and with your kit, and we place the annotators and coordinators who label and organize the data against your schema and your quality review. Latin America is our core talent pool, and we also recruit in the US and globally when a project calls for it.)
What is robotics sensor data collection?
It is the recording of synchronized streams from a physical task, such as gripper state, IMU motion, force and torque, tactile contact and depth or 3D vision, usually alongside video. Robot learning models train on these episodes to learn how to act, including the forces and distances a camera cannot see.
Which sensors matter most for training a manipulation policy?
Contact-rich tasks need force, torque and tactile data. Tasks with occluded hands need gripper state and IMU. Tasks that require precise placement need depth. Most programs start with video, gripper state and depth, then add force and tactile where the task demands them.
How do you synchronize data from several sensors?
With a shared timestamp source where possible, a sync event at the start of each episode that every stream records, and an end-of-episode check that clock drift stayed within tolerance. Episodes with gaps or drift beyond tolerance are rejected before training.
Can contributors in their own homes record sensor data, or does it need a lab?
Both work and serve different purposes. Lab and teleoperation stations give the cleanest, fully instrumented episodes. Contributors in their homes and workplaces, with a phone that records depth, a wearable IMU or a handheld instrumented gripper, provide the diversity of settings a general-purpose robot needs.
How is the quality of sensor data checked?
Per stream and per episode: completeness, sync, physical range, calibration version, protocol compliance and labeled outcome, usually in the client's quality dashboard. Rejection reasons grouped by contributor drive coaching, and paying per approved hour keeps incentives aligned with the quality bar.
Sensor data gives a robot the inside of a task: force, contact, motion and distance. Collecting it at scale takes a protocol hundreds of people can follow, synchronization and calibration that hold in the field, quality control per stream and a workforce that keeps recording week after week. Own the kit, the app and the quality bar, and bring in a partner to recruit, coordinate and sustain the people who record and organize your data. More on the Vintti AI model at vintti.com/ai.
Staff your sensor data collection program - start with a conversation: https://www.vintti.com/ai/book

See how we can help you find a perfect match in only 20 days. Interviewing candidates is free!
Book a Call
You can secure high-quality South American for around $9,000 USD per year. Interviewing candidates is completely free ofcharge.
You can secure high-quality South American talent in just 18 days and for around $9,000 USD per year.
Start Hiring